Machines for Shampoo Bars / Solid Shampoo - Small Soap Machines

Go to content

Machines for Shampoo Bars / Solid Shampoo

Machines for Solid Shampoo Bars
During the last few years many companies started the production of solid shampoo bars. This because solid shampoo bar is appreciated by the end user for different reasons: effective costs, natural ingredients, travel friendly and eco-friendly. The trend of solid shampoo bar production is continuously growing and many companies ask us machines for making solid shampoo bars.
Thanks to our experience gained in testing numerous solid shampoo formulations with our machines, we developed a series of machines studied for shampoo bars manufacturing. There are three mainly ways to produce solid shampoo bars:
  1. Starting from solid shampoo base, in form of noodles/flakes.
  2. Hot Process starting from SCI (Sodium Cocoyl Isethionate) in powder or granules, that is the mainly ingredient for solid shampoo bars, and adding additives and perfumes.
  3. Cold Process starting from SCI (Sodium Cocoyl Isethionate) in powder or granules, that is the mainly ingredient for solid shampoo bars, and adding additives and perfumes.

1. Shampoo Bars manufacturing from SYNDET NOODLES
In this process the noodles of solid shampoo bars and the other ingredients, are mixed by means of a Special Mixer heated by electrical heaters or turboflow. After the mixing stage the solid shampoo base is homogenized and extruded in continuous long solid shampoo bar, that is cut by hands or by means of the automatic soap cutter. On request the cut solid shampoo bars can be stamped by means of the soap stamping machines.

2. Shampoo Bars manufacturing from Powder/Granules + additives by means HOT PROCESS
Sodium Cocoyl Isethionate (SCI) and other surfactant/ingredients are melted and mixed by means of a Special Mixer heated by electrical heaters or by turboflow. After the mixing stage the shampoo base is homogenized and extruded in continuous long shampoo bar, that is cut by hands or by means of the EPC-60 automatic soap cutter. On request the cut shampoo bars can be stamped by means of the soap press PSP.

3. Shampoo Bars manufacturing from Powder/Granules + additives by means COLD PROCESS
Sodium Cocoyl Isethionate (SCI) and other surfactant/ingredients are mixed by means of a Mixer, without heating. After the mixing stage the shampoo base is refined 2 or 3 times, by means of our extruders and using a mesh, to amalgamate very well the ingredients. The product is extruded in continuous long shampoo bar that is cut by hands or by means of the EPC-60 automatic soap cutter. On request the cut shampoo bars can be stamped by means of the soap presses PSP.
 

Other solid shampoo bars manufacturing process can be studied and developed with the Customer.

Back to content